Autel Autolink AL619 Manual do Utilizador descarregar pdf (Página 35)

4) You may review the saved data in Playback function.

5) Press ESC button to exit.

5.4 Freeze Frame

Freeze Frame Data allows the technician to view the vehicle’s

operating parameters at the moment a DTC (Diagnostic Trouble

Code) is detected. For example, the parameters may include

engine speed (RPM), engine coolant temperature (ECT), or

vehicle speed sensor (VSS) etc. This information will aid the

technician by allowing the parameters to be duplicated for

diagnostic and repair purposes.

1) To view freeze frame data, use the UP/DOWN scroll button to

select Freeze Frame from Diagnostic Menu and press the OK

button. (Figure 5.3 )

2) Wait a few seconds while the scan tool validates the PID MAP.

3) If retrieved information covers more than one screen, use the

DOWN scroll button, as necessary, until all the data have been

shown up. (Figure 5.20)

Figure 5.20

 If there is no available freeze frame data, an advisory message

“No freeze frame data stored!” shows on the display.

4) Select Save to record freeze frame. A confirming message “Save

success!” shows on the display and scan tool return to previous

menu.

Freeze Frame

DTC that caused required

freeze frame data storage

P0193

Fuel system 1 status

Fuel system 2 status

Calculated load value

0.0

Engine coolant

temperature

-40

Save

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 65 66

Sem comentários

Autel Autolink AL619 Manual do Utilizador Página 35